291 Results (0.1 seconds)

Status: Open
Published Date: 08/05/2024
Closing Date: 30/05/2024
Value: £100,000
Chilled Water Cooling System for COMPASS (Composites at Speed and Scale) Facility - The University of Sheffield wishes to invite tenders for a 'Chilled Water Cooling System ' on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire. The AMRC has recently won HICOMS funding for an 'automated, large scale composites manufacturing centre', including a 'fully automated layup and consolidation cell' which will require a 'Chilled Water Cooling System'. The 'Chilled Water Cooling System' will sit adjacent to a new facility, feeding and controlling a chilled water ring main inside the building which may be used by the following equipment: - -Hydraulic Press -Resin Injection Unit -Tool Heating System - comprised of 8 individual temperature control units For the avoidance of doubt, this equipment does not form part of this tender exercise. The finished and equipped facility will be known as 'COMPASS'. Please note that it is anticipated that the 'Chilled Water Cooling System' will be a single chiller unit, external to the COMPASS building and associated pipework into the building, forming a ring main for various pieces of capital equipment, including the 'Hydraulic Press', the 'Resin Injection Unit', and the 8 individual heaters as per above. It is anticipated that the 'Chilled Water Cooling System' is required to be ready for Installation, Commissioning and Acceptance (SAT) around June 2025 due to building of the COMPASS facility which is currently under construction. However, we are looking for some flexibility around Delivery, Installation. Commissioning and Acceptance (SAT) in line with the construction of the COMPASS facility. As part of your tender response please provide a detailed project plan (including, but not limited to, the design, build, Delivery, Installation Commissioning and Acceptance (SAT) and training etc.) which also incorporates the above dates. The 'Chilled Water Cooling System' is to be used to control the temperature of a number of key pieces of equipment within the new COMPASS facility including a 'Hydraulic Press' already on order from Langzauner (model/type number LZT-OK-2400-SO), a mould tool thermal oil heating system (the 'Tool Heating System' set out above (8 no. 'i-TEMP Max tt4's' from TechnoTrans) already on order from ICS Cool Energy) connected to an AMRC customer supplied matched die, metallic mould tool (weighing approximately 180 tonnes) and a 'Resin Injection Unit' (not as yet specified). Tender Process and Documentation: This procurement is an open procedure. The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield Completed tenders must be returned through the same e-tendering system. Closing date for receipt of tenders: Thursday 30th May 2024 at 12 noon (UK time)

Status: Open
Published Date: 01/05/2024
Closing Date: 16/05/2024
Value: £177,896
Replacement of NHB AHU 2 - CPI are looking to appoint a suitable contractor who can supply and install Neville Hamlin Building's Air Handling Unit #2, which supplies air to the facility's Cleanroom 2 and R&D laboratory, the current system requires significant maintenance and therefore the decision has been made to replace with a new unit.

Status: Awarded
Published Date: 11/04/2024
Closing Date: 19/01/2024
Value: £53,268
THE PROVISION FOR THE INSTALLATION OF DETONATOR TESTBUILDING LOCAL EXHAUST VENTILATION (LEV) - HSE has a requirement to conduct the testing of both known and unknown explosives and their associated parts. 3.2 HSE's Science & Research Centre is looking to procure and install LEV at its new Detonator Test Building, used to test civil use explosives, primarily detonators. The building is a standard Hi-Cube ISO container. LEV will be required to remove gases of combustion (almost exclusively carbon dioxide, carbon monoxide and in some cases nitrogen). 3.3 The LEV will be used as a safeguarding / mitigation measure post-test so can be quite flexible with respect to air change rate(s) - as long as the value(s) are known (minimum wait periods post-test will be based on the air change rate value(s)). For reference, typical wait periods for similar facilities on the Buxton site are 15 to 20 minutes. 3.4 Overview of basic requirements: • LEV arrangement as shown in attached drawing (No. (1-) S210). Only needed within the detonator test chamber and middle multi-purpose room. • Simple on/off LEV that is able to be switched / directed between the 2 rooms. • Internal duct work to be suitable for anti-static conditions and/or conductive conditions. • Visual means of determining whether the LEV is operating - either a magnehelic gauge or combination of gauge and lights. • The submission should include the build, supply and installation of the LEV at our Buxton site. • Installation should also include system commissioning to ensure all is working correctly and within design parameters. • Operation and Maintenance information must be provided for HSE SD staff at handover.

Status: Open
Published Date: 07/03/2024
Closing Date: 28/03/2024
Value: neg.
UOW933 CNR Cooling - The University of Worcester is seeking a supplier to carry out a refurbishment and cooling replacement within the Central Network Room (CNR) containing server equipment. Installation of new DX cooling with Photovoltaic energy offset and monitoring/metering requirements

Status: Open
Published Date: 01/03/2024
Closing Date: 03/04/2024
Value: £141,000
HVAC Maintenance and Repair Contract - Gentoo has a number of offices, depots and blocks within the boundaries of Sunderland, Houghton, Hetton and Washington - Tyne and Wear. Many of these premises have heating ventilation and cooling (HVAC) systems installed within them. he Group is currently seeking to procure a Contractor to deliver preventative maintenance services to all of those systems. This will be undertaken by carrying out regular inspections of all equipment in a planned manner, identifying current or potential future issues and then carrying out any necessary repairs to ensure the systems continue to operate effectively. In addition to the above, the Provider will also be required to attend and rectify the systems as and when they fail to operate effectively or break down completely. This work is responsive, and will be required to be completed within pre-set timeframes. Effectively, this tender is to procure Providers to control all maintenance and repair works required to these systems. It is the intention of Gentoo to appoint one Provider to deliver these works.

Status: Open
Published Date: 26/02/2024
Closing Date: 01/01/0001
Value: £141,000
HVAC Maintenance and Repair Contract - Gentoo has a number of offices, depots and blocks within the boundaries of Sunderland, Houghton, Hetton and Washington - Tyne and Wear. Many of these premises have heating ventilation and cooling (HVAC) systems installed within them. he Group is currently seeking to procure a Contractor to deliver preventative maintenance services to all of those systems. This will be undertaken by carrying out regular inspections of all equipment in a planned manner, identifying current or potential future issues and then carrying out any necessary repairs to ensure the systems continue to operate effectively. In addition to the above, the Provider will also be required to attend and rectify the systems as and when they fail to operate effectively or break down completely. This work is responsive, and will be required to be completed within pre-set timeframes. Effectively, this tender is to procure Providers to control all maintenance and repair works required to these systems. It is the intention of Gentoo to appoint one Provider to deliver these works.

Status: Open
Published Date: 19/02/2024
Closing Date: 13/03/2024
Value: £500,000
GB-Huddersfield: Maintenance Inspection Test & Repair of BEMS Controls at the University of Huddersfield - Please see tender documents for further information.

Status: Open
Published Date: 08/02/2024
Closing Date: 20/03/2024
Value: neg.
Upgrade to Building Environment Management Systems - The University of Plymouth intends to procure a Schneider Building Environment Management Systems (BEMS) across the remainder of the campus where this system is not already installed.

Status: Open
Published Date: 07/02/2024
Closing Date: 21/02/2024
Value: neg.
Airconditioning Maintenance Service Contract - Attigo Academy Trust - SSC Partnership (an Agent) on behalf of the Attigo Academy Trust are currently out to tender for the provision of Airconditioning Maintenance Services. Suppliers that would like to take part in this tender process are invited to 'Express Interest' upon which the will be given access to the full tender documentation delivery through this e-tendering system. When the tender documents have been made available involved suppliers will receive notification via email and the tender documents can be accessed from the 'My Tenders' area of this website and selecting the 'View Details' button of this project. The deadline for submissions of the tender will be 21st February 2024. Please allow sufficient time to make your return as late returns will not be permitted. Any questions relating to this tender should be made via correspondence on the website and can be addressed to the main contact as shown in the details above.

Status: Open
Published Date: 02/02/2024
Closing Date: 04/03/2024
Value: £835,000,000
NOE CPC Specialist Estates Engineering & Maintenance Services (Hard FM) - The purpose of this procurement is to establish a framework for the provision of Specialist Estates Engineering & Maintenance Services (Hard FM). The framework will provide a one stop shop for organisations to fulfil their Specialist Estates Engineering & Maintenance Service (Hard FM) requirements, with suppliers selected for their experience and ability to provide customers with a comprehensive range of services and works that combine quality, value and compliance. The framework has been designed to facilitate current trends in FM and also to provide a flexible route for Estates and FM departments within contracting authorities to procure services. The framework Lots have been configured to enable Service Providers to be able to bid for areas within their specialism, making it friendly for SME's. Service Providers have the option of bidding for one or more Lots within the framework, with NOECPC appointing up to 12 Service Providers for each Lot. Lot 1 - Airconditioning, Air Handling Units and Refrigeration Lot 2 - Asbestos Removal Lot 3 - Automatic Doors and Roller Shutters Lot 4 - Electrical Works Lot 5 - Fire Alarm, Emergency Lighting and Fire Fighting Equipment Lot 6 - Fire Risk Assessments Lot 7 - Fire Stopping, Compartmentation and Associated Works Lot 8 - Heating and Plumbing Systems Lot 9 - Lifts, Hoists and Escalators Lot 10 - Lightning and Fall Protection Systems Lot 11 - Medical Gas Systems Lot 12 - Security Systems Lot 13 - Standby Power Systems Lot 14 - Water System Maintenance and Risk Management Lot 15 - Renewable & Low Carbon Heating Systems Lot 16 - Solar PV Lot 17 - General Building, Improvements, Installations, Repairs & Maintenance Lot 18 - High Secure (Forensic) FM Services Lot 19 - Managed FM Service This procurement exercise will be conducted on the Atamis Health Family Single e-Commercial System at: https://health-family.force.com/login